Get the NZXT Kraken Elite RGB 360. This AIO cooler effectively replaced an older model that caused my CPU overheating. It's easy to install and keeps the CPU cool. The software is necessary for adjusting fan/pump curves and customizing screen images. The ability to personalize the display is a standout feature, allowing users to make their PC unique.

Regarding what #3 said about the ASUS ProArt LC 420, it is definitely a solid unit, but honestly, with a chip like the 285K, you gotta be super careful about installation. Over the years I've seen way too many people fry their high-end CPUs because they didnt mount the block evenly or forgot to peel the plastic off the cold plate. It sounds silly but it happens more than you think.

• Check your case clearance first. You dont want to force a 420mm radiator into a chassis that barely fits it.
• Make sure your thermal paste application is solid. Dont use too much or too little, just enough to cover the heat spreader.
• Double check your pump speeds in the BIOS. Sometimes it defaults to silent mode and that wont cut it for this chip. Basically, just take your time. These chips run hot and any mistake with the mounting pressure is gonna cost you performance or worse. Keep it steady and dont rush the setup...

ASUS ProArt LC 420