Honestly, looking at current market trends and the specific thermal profile of the 285K, you really want something that excels in cold plate pressure and liquid flow rate. Since the 285K uses a tiled architecture, the hotspot has shifted slightly compared to the older generations, so high-performance mounting is key. Heres what I'd look at for market-leading performance: - Lian Li Galahad II Trinity Performance 360: This is basically a beast for high-load efficiency. It uses a 32mm thick radiator (most are 27mm), which gives it a lot more surface area to dissipate heat before it starts to soak. - EK-Nucleus AIO CR360 Lux D-RGB: If you want pure engineering quality, this is it. EK’s pump design is top-tier for thermal transfer, and it's usually ranked right at the top of the benchmark charts for high-TDP chips.
- DeepCool LT720: If you're looking at pure value-to-performance metrics, this is a serious contender. Its proprietary pump is incredibly powerful, though the fans can get a bit loud at max RPM. TBH, dont overlook the radiator thickness... that extra few millimeters on the Galahad really helps keep noise levels down because the fans dont have to spin as fast to dump the heat.

This one: CORSAIR iCUE Link Titan 360 RX RGB Liquid CPU Cooler, https://www.amazon.com/CORSAIR-iCUE-Titan-Liquid-Cooler/dp/B0D6BFBLTK?------123456890?7649-20

ARCTIC Liquid Freezer III 420. https://www.amazon.com/ARCTIC-Liquid-Freezer-III-PWM-Controlled/dp/B09VH34TB8?------123456890?7649-20

Nice, didn't know that

The Corsair iCUE LINK RGB AIO cooler series is a strong contender for the 285K. While the 285K's cooling requirements are less demanding than previous generations, a good AIO will maximize performance under heavy loads.