Hey,

So, I went through almost this exact thing with the 5800X3D and then the 7800X3D. I tried to “game” Black Friday / Cyber Monday both times… and honestly, the discounts on the X3D chips themselves were pretty underwhelming.

**What I saw in practice:**
- 5800X3D: launch-ish price stuck for months, BF/CM was like $20–30 off at most.
- 7800X3D: same story, tiny dip or you had to bundle some random stuff you didn’t really want.

The better deals, at least for me, were:
- **Micro Center**: in‑store bundles. I got a CPU + motherboard + 32GB DDR5 combo that was effectively like $80–100 off the CPU if you did the math.
- **Newegg**: occasional promo codes on mobo+CPU, but the actual CPU “sale” price was disappointing.

For the 9800X3D, I wouldn’t expect more than **5–10% off by Cyber Monday 2025**, unless AMD does some surprise promo. If you’re really focused on 1440p/240Hz and light streaming, I’d personally:

1. **Buy near launch** if you’re okay paying close to MSRP and want the performance now.
2. Or **wait for a good Micro Center (or local shop) bundle**, not the CPU alone. That’s where I actually felt I saved real money.

If you don’t have Micro Center near you, I’d set a realistic target like “$50 off or a decent mobo/ram combo” and if you don’t see that by BF/CM, just grab it whenever you’re ready.

Not as good as I hoped both times tbh, but the performance was worth it for high refresh gaming.

Hope this helps!

If 9800X3D follows 7800X3D patterns, I’d expect *maybe* 5–10% off by BF/Cyber Monday, with better value coming from bundles (Micro Center mobo+CPU, Newegg combos) than pure MSRP cuts. For 1440p/240, I’d personally buy near launch if you’ve already got a high‑end GPU lined up and care about a stable frame‑time experience, and only “wait for deals” if you’re also planning a new AM5 board/RAM where bundle savings can offset the small CPU discount. Hope that helps you time it a bit.

Hey,

If you’re mainly worried about price, I’d look at it this way:

**Tip 1: Set a hard budget and a “buy now” price.**
For a new X3D flagship, I’d personally assume **0–5% direct discount** by Cyber Monday, *maybe* 10% if AMD or retailers are pushing volume. If it hits your target (say, $X under MSRP), just grab it instead of waiting for a unicorn deal.

**Tip 2: Chase platform value, not just CPU price.**
I’ve been much happier saving $80–150 on **bundle deals** than hoping for $50 off the CPU. Micro Center is usually king for in‑store CPU+mobo+RAM combos. Online, watch Newegg/Amazon for:
- CPU + B650/B850 board combos
- Motherboard rebates or gift cards

**Tip 3: Use a price tracker and alerts now.**
CamelCamelCamel (Amazon), PCPartPicker, and Newegg wishlists are your friends. That way if there’s a short flash sale, you don’t miss it.

**Tip 4: Consider “good enough now” math.**
If you’re on a much older CPU and already missing 1440p/240 potential, the extra months of use might be worth more than the $30–50 you *might* save by waiting.

So, IMO: expect tiny direct cuts, aim for **platform bundles**, and buy as soon as the total build cost hits your comfort zone.

Hope this helps!

Hey,

If you’re mainly worried about price, I’d look at it this way:

**Tip 1: Set a hard budget and a “buy now” price.**
For a new X3D flagship, I’d personally assume **0–5% direct discount** by Cyber Monday, *maybe* 10% if AMD or retailers are pushing volume. If it hits your target (say, $X under MSRP), just grab it instead of waiting for a unicorn deal.

**Tip 2: Chase platform value, not just CPU price.**
I’ve been much happier saving $80–150 on **bundle deals** than hoping for $50 off the CPU. Micro Center is usually king for in‑store CPU+mobo+RAM combos. Online, watch Newegg/Amazon for:
- CPU + B650/B850 board combos
- Motherboard rebates or gift cards

**Tip 3: Use a price tracker and alerts now.**
CamelCamelCamel (Amazon), PCPartPicker, and Newegg wishlists are your friends. That way if there’s a short flash sale, you don’t miss it.

**Tip 4: Consider “good enough now” math.**
If you’re on a much older CPU and already missing 1440p/240 potential, the extra months of use might be worth more than the $30–50 you *might* save by waiting.

So, IMO: expect tiny direct cuts, aim for **platform bundles**, and buy as soon as the total build cost hits your comfort zone.

Hope this helps!

Hey,

So, bit of a different angle here. I cooked a 5800X (non‑X3D) a couple years back chasing an overclock and a “too good to be true” combo deal, and it taught me to be *way* more careful with launch CPUs + sales hype.

For the 9800X3D, I’d think less about "how big is the Cyber Monday discount" and more about **safety / reliability around launch**:

- Early BIOS/AGESA for new X3D chips is often rough. You might want to **wait for at least a couple BIOS revisions** before jumping, especially on a brand‑new board.
- Some cheap bundles cut corners on VRM quality or include boards with weak power delivery. For a hot chip like an X3D, be careful and **stick to boards with solid VRMs and decent heatsinks**, even if it’s not the absolute cheapest combo.
- I’d suggest buying from places with **good RMA support** (Micro Center, Amazon) over saving an extra 10–20 bucks from a sketchy seller.

Lesson learned for me: a small Cyber Monday discount isn’t worth random crashes, memory issues, or thermal problems. I’d aim for a reliable board+CPU combo from a reputable retailer, even if that means “only” 5–10% off by Cyber Monday.

Hope this helps!

Hey,

So, bit of a different angle here. I cooked a 5800X (non‑X3D) a couple years back chasing an overclock and a “too good to be true” combo deal, and it taught me to be *way* more careful with launch CPUs + sales hype.

For the 9800X3D, I’d think less about "how big is the Cyber Monday discount" and more about **safety / reliability around launch**:

- Early BIOS/AGESA for new X3D chips is often rough. You might want to **wait for at least a couple BIOS revisions** before jumping, especially on a brand‑new board.
- Some cheap bundles cut corners on VRM quality or include boards with weak power delivery. For a hot chip like an X3D, be careful and **stick to boards with solid VRMs and decent heatsinks**, even if it’s not the absolute cheapest combo.
- I’d suggest buying from places with **good RMA support** (Micro Center, Amazon) over saving an extra 10–20 bucks from a sketchy seller.

Lesson learned for me: a small Cyber Monday discount isn’t worth random crashes, memory issues, or thermal problems. I’d aim for a reliable board+CPU combo from a reputable retailer, even if that means “only” 5–10% off by Cyber Monday.

Hope this helps!

Hey,

I’d look at this less as “will the 9800X3D be on sale?” and more as “how will AMD vs Intel be priced against each other by then?” – that’s usually what really moves discounts.

Historically, when AMD launches an X3D chip, they hold price pretty hard **until** Intel counters with a strong gaming SKU or cuts prices. That’s when you see the real movement. With 5800X3D / 7800X3D, pure CPU discounts by BF/Cyber Monday were small, but Intel’s competing chips (12700K/13700K etc.) got bigger cuts… which then pushed retailers to do AMD **bundles** to keep them attractive.

So by Cyber Monday 2025, I’d expect something like:
- **Straight 9800X3D discount:** maybe 5–10% max if AMD’s still on top in gaming
- **Intel gaming SKUs:** often 10–20% off, plus board bundles (Micro Center especially)
- **Best value:** Micro Center mobo+CPU (AMD *or* Intel), then Newegg combos, then Amazon mostly just matching base price

If Intel lands close in 1440p/240 Hz performance, the real “deal” might be an undervalued Intel combo rather than a cheap 9800X3D.

If you’re dead-set on X3D, I’d budget for near-MSRP and treat any bundle discount as a bonus. If you’re brand-flexible, watch who’s “losing” the gaming crown next fall… the loser usually has the better sales.

Hope that helps – happy to sanity-check a parts list if you narrow it down later.

Hey,

Let me hit this from a pure **performance brain** angle instead of just the deal-hunting side.

If you’re aiming at **1440p/240Hz**, the main question IMO isn’t “will the 9800X3D be cheaper on Cyber Monday?” but:

**Option A: Buy 9800X3D at/near launch**
- **Pros:**
- You’re actually *using* that 240Hz monitor sooner. Over the years I’ve noticed the biggest gain in "feel" is going from like 140–180 fps to 220–300+ in fast shooters. X3D chips shine exactly there.
- Early BIOS/AGESA updates usually give small performance bumps over the first 2–3 months, so the chip tends to get *better* while you own it.
- **Cons:**
- You’ll probably pay full or almost-full MSRP.
- Platform (mobos, RAM) might be slightly pricier early on.

**Option B: Wait for Black Friday / Cyber Monday 2025**
- **Pros:**
- Realistically, based on 5800X3D/7800X3D, I’d expect **5–10% off** the CPU at best, but the real win is often **combo value**:
- Micro Center: insane CPU + mobo + RAM bundles, sometimes effectively $100–150 in "performance per dollar" saved.
- Newegg/Amazon: $20–50 off or game codes, maybe a board discount.
- By then you’ll have a clearer picture on how it stacks against Intel’s current stuff in *actual* 1440p/240 benchmarks.
- **Cons:**
- You’re giving up a full year of better 1% lows and higher avg fps just to save maybe 50–80 bucks on the CPU itself.

**Option C: Buy a cheaper X3D earlier (e.g. 7800X3D) and skip the 9800X3D**
- **Pros:**
- Sometimes the *previous* X3D gets the best BF/Cyber Monday cuts. 7800X3D dropped into “stupid good” territory in a few sales.
- For 1440p/240, in my experience, the jump from “good” to “great” CPU (5800X3D → 7800X3D) was massive; the jump from “great” to “latest” is usually much smaller… like 5–10% in real games.
- **Cons:**
- Slightly less future-proof and less bragging rights if that matters to you.

**What I’d personally do (performance-first mindset):**
- If your current rig is already doing ~180+ fps at 1440p in the games you care about, I’d **wait for BF/Cyber Monday** and either:
- Grab a **9800X3D combo deal** at Micro Center/Newegg, or
- Snipe a heavily discounted **7800X3D bundle** if benchmarks show the gap is small.
- If your current setup is capping you at like 100–120 fps, I’d just **buy near launch**, enjoy the higher fps all year, and accept that you “overpaid” maybe 50–100 bucks vs waiting.

Performance-wise, the biggest L isn’t paying launch MSRP… it’s sitting on a slow CPU for another year while owning a 240Hz panel.

Hope this helps! Feel free to drop your current specs if you want a more “is it worth it for *you*” type answer.

Hey, one angle I haven’t seen yet is the *maintenance / service* side of buying at launch vs waiting.

If you grab the 9800X3D early, assume:
- **More BIOS updates**: You’ll definitely want to stay on top of AGESA updates for stability and boosting behavior. Plan to update BIOS a few times in the first 3–6 months.
- **Memory tuning time**: New gen + high refresh = you’ll probably spend an evening or two dialing in EXPO, testing with OCCT/Karhu/GSAT, etc. Not hard, just time.
- **Cooling / case airflow check**: Before Cyber Monday hits, I’d already budget for a solid cooler + a dust cleaning session + maybe new case fans. X3D chips aren’t super hot, but they *hate* poor airflow and bad mounting.
- **Thermal paste + mounting**: Over the years I’ve seen a lot of “my X3D is unstable” posts that were just bad mounts or rock‑hard old paste. Fresh paste + even mounting pressure matters more on these dense chips.

So, from a service perspective, waiting to Cyber Monday doesn’t just maybe save you 5–10% — it also lets early BIOS/AGESA bugs get ironed out, boards ship with better defaults, and there’ll be more user‑tested combo recommendations. If you don’t enjoy being an early‑adopter guinea pig/tech support for your own rig, I’d *honestly* lean toward waiting a bit, even if the discount isn’t huge.

Whichever way you go, factor in: good cooler, quality PSU, proper case airflow, and time to test (Cinebench loop, OCCT/Prime95 small FFT, a couple hours of your main games). That’s what really makes a 1440p/240 build feel “set and forget” long term.

Hope this helps! Happy to bounce parts lists if you want to sanity‑check thermals / VRM choices.

Hey,

If you’re even mildly comfortable doing DIY, I’d lean *hard* into self-service for this instead of paying a shop, especially around Black Friday/Cyber Monday.

In my experience (been building since Sandy Bridge days), the **big savings on new X3D parts aren’t just the sticker discount**, it’s the DIY stack:

- **Watch for bare CPU deals + separate mobo/RAM** instead of “prebuilt upgrade” services. You can mix a slightly discounted 9800X3D with a heavily discounted B650/B850 board and cheap DDR5 kit and end up way ahead.
- **Micro Center DIY route**: Their in-store CPU+mobo bundles + “$20 off RAM” type promos are usually nuts if you build it yourself. Their paid assembly basically eats the discount.
- **Newegg/Amazon combos**: Learn to piece together your own “bundle” from separate promos (CPU here, board there, rebate PSU somewhere else). Takes more time, but it’s where DIY wins.

Realistically, I’d expect maybe **5–10% direct CPU discount** by Cyber Monday, but you can often squeeze **another 10–15% overall** by:

- recycling your current case/PSU/cooler,
- timing individual part sales,
- doing your own BIOS update + tuning.

If you’re comfortable following a YouTube guide, there’s almost no reason to pay someone to “upgrade” a single-socket AM5 build for you.

For 1440p/240 and light streaming, DIY lets you put the saved money into a better cooler or GPU instead of labor fees.

Hope this helps!

Hey, one angle nobody’s really hit yet: if you care about power use / footprint, *when* you buy can matter almost as much as *how much* you pay.

**Tip:** If you can wait, use Cyber Monday to grab a full “efficiency stack” instead of just chasing a 9800X3D discount.

- Prior-gen X3D (7800X3D/9700X3D if it exists) might be heavily discounted and honestly overkill for 1440p/240 while drawing less power than non‑X3D flagships.
- Look for bundles that include efficient B650/B850 boards with good VRM efficiency and offset/eco‑mode support. That plus X3D + undervolt/curve optimizer = big watt savings.
- Micro Center tends to have the best eco “value per watt” deals: CPU + board + sometimes RAM, which means fewer shipments/boxes (small thing, but it adds up) and you’re less likely to “overbuy” parts.

Realistically, by Cyber Monday I’d expect small raw CPU price cuts (5–10%), but you can **stack**: modest CPU drop + eco‑friendly board + maybe 600–750W Gold PSU instead of a monster unit. Same performance target, lower total energy use over the life of the rig.

So yeah, if you’re fine not having day‑one bragging rights, waiting for CM 2025 and aiming for an efficient X3D + board combo is probably the best “green” and “wallet” play.

Hope this helps!

Hey!

One angle I don’t really see in the thread yet is the **boring but super important compatibility stuff** that can totally kill a “great deal” on a 9800X3D.

If you’re aiming for Cyber Monday 2025, I’d definitely think about:

1. **Motherboard support**
- Make sure whatever AM5 board is in those bundles actually **supports the 9800X3D by BIOS**. Early on, some boards ship with older BIOS that won’t boot the new chips.
- If you don’t have an older CPU to flash with, look for boards with **BIOS Flashback** (can update BIOS without a CPU). Super handy.

2. **VRM / power delivery**
- Even if it’s “compatible”, cheap combo deals sometimes pair a high‑end CPU with a weak VRM board. For 1440p/240 and streaming, I’d personally aim for at least a solid mid‑range B650/B750 or X670/X750, not the bare‑bones stuff.

3. **RAM speed / EXPO**
- Cyber Monday bundles might throw in slower DDR5 or non‑EXPO kits. For an X3D chip, memory speed and timings matter. Check it’s something like 6000MT/s EXPO (or whatever the new sweet spot is by then).

4. **Cooler + case clearance**
- Don’t forget cooler mounting (AM5 bracket support) and height clearance in your current case. Amazing deal doesn’t help if your cooler doesn’t fit.

So in my opinion, by Cyber Monday you’ll probably see **small direct discounts** but some tempting bundles. Just double‑check BIOS support, VRM quality, and RAM specs before jumping on a “too good” combo.

Hope this helps! If you’ve got a board in mind already, drop the model and people here can sanity‑check it for 9800X3D readiness.

Hey!

One angle I don’t really see in the thread yet is the **boring but super important compatibility stuff** that can totally kill a “great deal” on a 9800X3D.

If you’re aiming for Cyber Monday 2025, I’d definitely think about:

1. **Motherboard support**
- Make sure whatever AM5 board is in those bundles actually **supports the 9800X3D by BIOS**. Early on, some boards ship with older BIOS that won’t boot the new chips.
- If you don’t have an older CPU to flash with, look for boards with **BIOS Flashback** (can update BIOS without a CPU). Super handy.

2. **VRM / power delivery**
- Even if it’s “compatible”, cheap combo deals sometimes pair a high‑end CPU with a weak VRM board. For 1440p/240 and streaming, I’d personally aim for at least a solid mid‑range B650/B750 or X670/X750, not the bare‑bones stuff.

3. **RAM speed / EXPO**
- Cyber Monday bundles might throw in slower DDR5 or non‑EXPO kits. For an X3D chip, memory speed and timings matter. Check it’s something like 6000MT/s EXPO (or whatever the new sweet spot is by then).

4. **Cooler + case clearance**
- Don’t forget cooler mounting (AM5 bracket support) and height clearance in your current case. Amazing deal doesn’t help if your cooler doesn’t fit.

So in my opinion, by Cyber Monday you’ll probably see **small direct discounts** but some tempting bundles. Just double‑check BIOS support, VRM quality, and RAM specs before jumping on a “too good” combo.

Hope this helps! If you’ve got a board in mind already, drop the model and people here can sanity‑check it for 9800X3D readiness.

Hey,

One angle I haven’t really seen mentioned yet is **where you live** and even your **local climate**. It actually matters more than people think for "is it worth waiting for Cyber Monday?" on a hot chip like a 9800X3D.

**Background:** I’m in southern Europe now (expensive power, hot summers), used to live in the Midwest US (cheap-ish power, easy access to Micro Center). My upgrade & deal strategy changed a lot between those two.

**Why it matters:**
- In hotter regions / no strong AC, you’re gonna pay extra in cooling or suffer throttling if you cheap out on the cooler or case. So a “$30 off CPU” deal might be worse than a **bundle with a better board + VRM + cooler** that runs cooler/safer long-term.
- In the US, Micro Center combo deals are insane. In EU/UK or other regions, you’re usually looking at smaller CPU discounts but sometimes decent **retailer‑specific bundles** (Caseking, Mindfactory, Scan, etc.). Sales timing can also lag behind US BF/Cyber Monday.

**Practical suggestion:**
- If you’re in the US with Micro Center nearby: I’d expect *better* value from an in-store mobo+CPU combo than a straight Cyber Monday price cut. Plan around that.
- If you’re in a hot climate / high electricity region: prioritize a board with solid power delivery + good case airflow, even if it means buying a bit earlier at near-MSRP and skipping a small Cyber Monday CPU discount.

Realistically, I’d plan for **5–10% off max on the bare CPU** by Cyber Monday 2025 and more like **10–15% effective savings** if you catch a good regional bundle… but how much you save on cooling and comfort in your climate might be the bigger long-term win.

Hope this helps!